Various color wall cladding artificial culture stone

The Construction Process of Pu Stone(Pu Wall Stone Panel/PU Faux Stone Panels/Pu Faux Wall Panels)

1. Treatment of the grassroots

Before construction, clean the impurities on the surface of the base of the wall to ensure that the wall is basically flat.

2. Wipe the leveling layer

The leveling layer is to use cement mortar in a ratio of 1:3, and fiber cement board or wood plywood is used as the base for indoor use.

3. Arranging bricks, dividing grids, and elastic lines

In principle, the width of the brick joints is 8mm, and the whole bricks must be used for dividing and arranging bricks. If the whole brick cannot be used, the ash joint should be adjusted. If it cannot be adjusted, the whole brick should be cut.

4. Paste PU stone

The PU stone should be inlaid from bottom to top, and the bonding thickness should be between 4 and 8mm.

5. Pointing

According to the material and depth required by the design, the jointing is carried out horizontally and then vertically to ensure the effect of continuous, straight, smooth, no crack and no hollow.

6. Clean the surface

When the surface is dry and the cement slurry is dry quickly, wipe the whole with dry cotton yarn, and then rinse the paved PU stone with clean water.